SHS 60/4

SHS 60/4 is a cold-formed square hollow section per EN 10219: side 60 mm, wall thickness 4 mm, weight 6.7 kg/m, cross-section area 8.6 cm², moment of inertia Iy = 43.6 cm⁴, elastic section modulus Wel,y = 14.5 cm³.

Geometry

Side dimension60.00 mm

Wall thickness t4.00 mm

Outer corner radius r_o8.00 mm

Inner corner radius r_i4.00 mm

Cross-section area A8.550 cm²

Weight G
steel 7850 kg/m³6.71kg/m

Section properties

I43.550 cm⁴

W_el14.520 cm³

W_pl17.640 cm³

i22.60 mm

I_t72.640 cm⁴

Reference

Profile standardEN 10219

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.