SHS · EN 10219 · cold formed

SHS 30/2

SHS 30/2 is a cold-formed square hollow section per EN 10219: side 30 mm, wall thickness 2 mm, weight 1.7 kg/m, cross-section area 2.1 cm², moment of inertia Iy = 2.7 cm⁴, elastic section modulus Wel,y = 1.8 cm³.

Cross section · mm

30Side a · mm

2Wall thickness t · mm

2.14Area A · cm²

1.68Mass G · kg/m

Geometry

Side dimension30.00 mm

Wall thickness t2.00 mm

Outer corner radius r_o4.00 mm

Inner corner radius r_i2.00 mm

Cross-section area A2.140 cm²

Weight G
steel 7850 kg/m³1.68kg/m

Section properties

I2.722 cm⁴

W_el1.815 cm³

W_pl2.205 cm³

i11.30 mm

I_t4.540 cm⁴

Reference

Profile standardEN 10219

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of SHS 30/2 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 0.6 kN·m

Shear/ 17.0 kN

Compression/ 2.1 kN

Steelγ_M0γ_M1L_crmmkClass1

Resistances and factors

M_c,y,Rd / M_c,z,RdW_pl0.6 kN·m / 0.6 kN·m

V_c,z,Rd / V_c,y,RdA_v = 107 mm²17.0 kN / 17.0 kN

N_pl,Rd / N_b,Rd58.9 kN / 2.1 kN

N_cr,y / N_cr,z2.3 kN / 2.3 kN

f_yEN 10219-1275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve c · χ0.04

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.