SHS 180/10

SHS 180/10 is a cold-formed square hollow section per EN 10219: side 180 mm, wall thickness 10 mm, weight 50.7 kg/m, cross-section area 64.6 cm², moment of inertia Iy = 3017 cm⁴, elastic section modulus Wel,y = 335.2 cm³.

Geometry

Side dimension180.00 mm

Wall thickness t10.00 mm

Outer corner radius r_o25.00 mm

Inner corner radius r_i15.00 mm

Cross-section area A64.570 cm²

Weight G
steel 7850 kg/m³50.70kg/m

Section properties

I3 017.000 cm⁴

W_el335.200 cm³

W_pl403.500 cm³

i68.40 mm

I_t5 074.000 cm⁴

Reference

Profile standardEN 10219

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.