SHS 180/10

SHS 180/10 is a hot-finished square hollow section per EN 10210: side 180 mm, wall thickness 10 mm, weight 52.5 kg/m, cross-section area 66.9 cm², moment of inertia Iy = 3193 cm⁴, elastic section modulus Wel,y = 354.8 cm³.

Geometry

Side dimension180.00 mm

Wall thickness t10.00 mm

Outer corner radius r_o15.00 mm

Inner corner radius r_i10.00 mm

Cross-section area A66.930 cm²

Weight G
steel 7850 kg/m³52.50kg/m

Section properties

I3 193.000 cm⁴

W_el354.800 cm³

W_pl423.900 cm³

i69.10 mm

I_t5 048.000 cm⁴

Reference

Profile standardEN 10210

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.