SHS · EN 10210 · hot finished

SHS 200/5

SHS 200/5 is a hot-finished square hollow section per EN 10210: side 200 mm, wall thickness 5 mm, weight 30.4 kg/m, cross-section area 38.7 cm², moment of inertia Iy = 2445 cm⁴, elastic section modulus Wel,y = 244.5 cm³.

Cross section · mm

200Side a · mm

5Wall thickness t · mm

38.73Area A · cm²

30.40Mass G · kg/m

Geometry

Side dimension200.00 mm

Wall thickness t5.00 mm

Outer corner radius r_o7.50 mm

Inner corner radius r_i5.00 mm

Cross-section area A38.730 cm²

Weight G
steel 7850 kg/m³30.40kg/m

Section properties

I2 445.000 cm⁴

W_el244.500 cm³

W_pl282.500 cm³

i79.50 mm

I_t3 756.000 cm⁴

Reference

Profile standardEN 10210

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of SHS 200/5 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 67.2 kN·m

Shear/ 307.5 kN

Compression/ 890.1 kN

Steelγ_M0γ_M1L_crmmkClass3

Resistances and factors

M_c,y,Rd / M_c,z,RdW_el67.2 kN·m / 67.2 kN·m

V_c,z,Rd / V_c,y,RdA_v = 1937 mm²307.5 kN / 307.5 kN

N_pl,Rd / N_b,Rd1.07 MN / 890.1 kN

N_cr,y / N_cr,z2.03 MN / 2.03 MN

f_yEN 10210-1275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve a · χ0.84

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.