SHS 200/10

SHS 200/10 is a hot-finished square hollow section per EN 10210: side 200 mm, wall thickness 10 mm, weight 58.8 kg/m, cross-section area 74.9 cm², moment of inertia Iy = 4471 cm⁴, elastic section modulus Wel,y = 447.1 cm³.

Geometry

Side dimension200.00 mm

Wall thickness t10.00 mm

Outer corner radius r_o15.00 mm

Inner corner radius r_i10.00 mm

Cross-section area A74.930 cm²

Weight G
steel 7850 kg/m³58.80kg/m

Section properties

I4 471.000 cm⁴

W_el447.100 cm³

W_pl530.900 cm³

i77.20 mm

I_t7 031.000 cm⁴

Reference

Profile standardEN 10210

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.