SHS 180/16

SHS 180/16 is a hot-finished square hollow section per EN 10210: side 180 mm, wall thickness 16 mm, weight 80.2 kg/m, cross-section area 102.2 cm², moment of inertia Iy = 4504 cm⁴, elastic section modulus Wel,y = 500.4 cm³.

Geometry

Side dimension180.00 mm

Wall thickness t16.00 mm

Outer corner radius r_o24.00 mm

Inner corner radius r_i16.00 mm

Cross-section area A102.210 cm²

Weight G
steel 7850 kg/m³80.20kg/m

Section properties

I4 504.000 cm⁴

W_el500.400 cm³

W_pl621.200 cm³

i66.40 mm

I_t7 343.000 cm⁴

Reference

Profile standardEN 10210

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.