SHS 50/2.5

SHS 50/2.5 is a cold-formed square hollow section per EN 10219: side 50 mm, wall thickness 2.5 mm, weight 3.6 kg/m, cross-section area 4.6 cm², moment of inertia Iy = 16.9 cm⁴, elastic section modulus Wel,y = 6.8 cm³.

Geometry

Side dimension50.00 mm

Wall thickness t2.50 mm

Outer corner radius r_o5.00 mm

Inner corner radius r_i2.50 mm

Cross-section area A4.590 cm²

Weight G
steel 7850 kg/m³3.60kg/m

Section properties

I16.940 cm⁴

W_el6.778 cm³

W_pl8.074 cm³

i19.20 mm

I_t27.530 cm⁴

Reference

Profile standardEN 10219

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.