SHS 220/10

SHS 220/10 is a hot-finished square hollow section per EN 10210: side 220 mm, wall thickness 10 mm, weight 65.1 kg/m, cross-section area 82.9 cm², moment of inertia Iy = 6050 cm⁴, elastic section modulus Wel,y = 550 cm³.

Geometry

Side dimension220.00 mm

Wall thickness t10.00 mm

Outer corner radius r_o15.00 mm

Inner corner radius r_i10.00 mm

Cross-section area A82.930 cm²

Weight G
steel 7850 kg/m³65.10kg/m

Section properties

I6 050.000 cm⁴

W_el550.000 cm³

W_pl649.800 cm³

i85.40 mm

I_t9 473.000 cm⁴

Reference

Profile standardEN 10210

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.