RHS · EN 10219 · cold formed

RHS 300×200/6.3

RHS 300×200/6.3 is a cold-formed rectangular hollow section per EN 10219: height 300 mm, width 200 mm, wall thickness 6.3 mm, weight 47.1 kg/m, cross-section area 60.1 cm², moment of inertia Iy = 7624 cm⁴, elastic section modulus Wel,y = 508.3 cm³.

Cross section · mm

300Height h · mm

200Width b · mm

60.05Area A · cm²

47.10Mass G · kg/m

Geometry

Height h300.00 mm

Width b200.00 mm

Wall thickness t6.30 mm

Outer corner radius r_o15.75 mm

Inner corner radius r_i9.45 mm

Cross-section area A60.050 cm²

Weight G
steel 7850 kg/m³47.10kg/m

Section properties

I7 624.000 cm⁴4 104.000 cm⁴

W_el508.300 cm³410.400 cm³

W_pl609.900 cm³463.200 cm³

I_t8 524.000 cm⁴

Reference

Profile standardEN 10219

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of RHS 300×200/6.3 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 167.7 kN·m

Shear/ 572.1 kN

Compression/ —

The compression check is not available: in uniform compression the section is class 4 and effective properties per EN 1993-1-5 are required. Bending and shear are unaffected.

Steelγ_M0γ_M1L_crmmkClass1 / 4bending / compression

Resistances and factors

M_c,y,Rd / M_c,z,RdW_pl167.7 kN·m / 127.4 kN·m

V_c,z,Rd / V_c,y,RdA_v = 3603 mm²572.1 kN / 381.4 kN

N_pl,Rd / N_b,Rd— / —

N_cr,y / N_cr,z6.32 MN / 3.40 MN

f_yEN 10219-1275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve c · χ0.73

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.