LU · EN 10056-1

L 150×90/15

L 150×90/15 is an unequal-leg steel angle per EN 10056-1: legs 150×90 mm, thickness 15 mm, weight 26.6 kg/m, cross-section area 33.9 cm², moment of inertia Iy = 761 cm⁴, elastic section modulus Wel,y = 77.7 cm³.

Cross section · mm

150Long leg a · mm

90Short leg b · mm

33.90Area A · cm²

26.60Mass G · kg/m

Geometry

Long leg a150.00 mm

Short leg b90.00 mm

Thickness t15.00 mm

Root radius r₁12.00 mm

Cross-section area A33.900 cm²

Centroid C_x52.1 mm

Centroid C_y22.3 mm

Weight G
steel 7850 kg/m³26.60kg/m

Section properties

I_y761.000 cm⁴

I_z205.000 cm⁴

W_el,y77.700 cm³

W_el,z30.400 cm³

i_y47.40 mm

i_z24.60 mm

Principal axes u–v

I_u841.000 cm⁴

I_v126.000 cm⁴

i_v19.30 mm

tan α0.354 –

Reference

Profile standardEN 10056-1

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of L 150×90/15 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 21.4 kN·m

Shear/ 269.1 kN

Compression/ 93.4 kN

Steelγ_M0γ_M1L_crmmkClass3

Resistances and factors

M_c,y,Rd / M_c,z,RdW_el21.4 kN·m / 8.4 kN·m

V_c,z,Rd / V_c,y,RdA_v = 1695 mm²269.1 kN / 269.1 kN

N_pl,Rd / N_b,Rd932.3 kN / 93.4 kN

N_cr,y / N_cr,v630.9 kN / 104.5 kN

f_yEN 10025-2275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve b · χ0.10

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.

For angles the bending values refer to the axes parallel to the legs, which are not principal axes. A moment about one of them also bends the section about the other, so bending has to be resolved into the principal axes u and v and checked biaxially. Buckling already uses the weaker principal axis v.