FL · EN 10058

FL 70×10

FL 70×10 is a hot rolled steel flat bar per EN 10058: width 70 mm, thickness 10 mm, weight 5.5 kg/m, cross-section area 7 cm², moment of inertia Iy = 28.6 cm⁴, elastic section modulus Wel,y = 8.2 cm³.

Cross section · mm

70Width b · mm

10Thickness t · mm

7.00Area A · cm²

5.49Mass G · kg/m

Geometry

Width b70.00 mm

Thickness t10.00 mm

Cross-section area A7.000 cm²

Weight G
steel 7850 kg/m³5.49kg/m

Section properties

I28.583 cm⁴0.583 cm⁴

W_el8.167 cm³1.167 cm³

W_pl12.250 cm³1.750 cm³

i20.20 mm2.89 mm

Reference

Profile standardEN 10058

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of FL 70×10 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 3.4 kN·m

Shear/ 111.1 kN

Compression/ 0.5 kN

Steelγ_M0γ_M1L_crmmkClass1

Resistances and factors

M_c,y,Rd / M_c,z,RdW_pl3.4 kN·m / 0.5 kN·m

V_c,z,Rd / V_c,y,RdA_v = 700 mm²111.1 kN / 111.1 kN

N_pl,Rd / N_b,Rd192.5 kN / 0.5 kN

N_cr,y / N_cr,z23.7 kN / 0.5 kN

f_yEN 10025-2275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve c · χ0.00

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.