FL · EN 10058

FL 60×10

FL 60×10 is a hot rolled steel flat bar per EN 10058: width 60 mm, thickness 10 mm, weight 4.7 kg/m, cross-section area 6 cm², moment of inertia Iy = 18 cm⁴, elastic section modulus Wel,y = 6 cm³.

Cross section · mm

60Width b · mm

10Thickness t · mm

6.00Area A · cm²

4.71Mass G · kg/m

Geometry

Width b60.00 mm

Thickness t10.00 mm

Cross-section area A6.000 cm²

Weight G
steel 7850 kg/m³4.71kg/m

Section properties

I18.000 cm⁴0.500 cm⁴

W_el6.000 cm³1.000 cm³

W_pl9.000 cm³1.500 cm³

i17.30 mm2.89 mm

Reference

Profile standardEN 10058

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of FL 60×10 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 2.5 kN·m

Shear/ 95.3 kN

Compression/ 0.4 kN

Steelγ_M0γ_M1L_crmmkClass1

Resistances and factors

M_c,y,Rd / M_c,z,RdW_pl2.5 kN·m / 0.4 kN·m

V_c,z,Rd / V_c,y,RdA_v = 600 mm²95.3 kN / 95.3 kN

N_pl,Rd / N_b,Rd165.0 kN / 0.4 kN

N_cr,y / N_cr,z14.9 kN / 0.4 kN

f_yEN 10025-2275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve c · χ0.00

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.