SHS 100/5

SHS 100/5 is a hot-finished square hollow section per EN 10210: side 100 mm, wall thickness 5 mm, weight 14.7 kg/m, cross-section area 18.7 cm², moment of inertia Iy = 279.4 cm⁴, elastic section modulus Wel,y = 55.9 cm³.

Geometry

Side dimension100.00 mm

Wall thickness t5.00 mm

Outer corner radius r_o7.50 mm

Inner corner radius r_i5.00 mm

Cross-section area A18.730 cm²

Weight G
steel 7850 kg/m³14.70kg/m

Section properties

I279.400 cm⁴

W_el55.890 cm³

W_pl66.360 cm³

i38.60 mm

I_t439.400 cm⁴

Reference

Profile standardEN 10210

EurocodeEN 1993-1-1 (EC3)

··

Disclaimer: All content, data, and calculations on this website are provided "as is" for informational purposes only. While we strive for accuracy, we do not warrant that the content is complete, up-to-date, or free of errors. The content does not constitute professional advice and must be verified against the official applicable standards by a qualified person. Use of this data is strictly at the user's own risk, and we accept no liability for any direct or indirect damages resulting from its use.