L · EN 10056-1

L 90×90/10

L 90×90/10 is an equal-leg steel angle per EN 10056-1: leg length 90 mm, thickness 10 mm, weight 13.4 kg/m, cross-section area 17.1 cm², moment of inertia Iy = 126.9 cm⁴, elastic section modulus Wel,y = 19.8 cm³.

Cross section · mm

90Leg a · mm

10Thickness t · mm

17.10Area A · cm²

13.40Mass G · kg/m

Geometry

Leg length a90.00 mm

Thickness t10.00 mm

Cross-section area A17.100 cm²

Centroid C_x=C_y25.8 mm

Weight G
steel 7850 kg/m³13.40kg/m

Section properties

Moment of inertia I_y=I_z126.900 cm⁴

Section modulus W_el19.766 cm³

Plastic modulus W_pl36.030 cm³

Radius of gyration i_y27.20 mm

Principal axes u–v

I_u201.500 cm⁴

I_v52.330 cm⁴

Reference

Profile standardEN 10056-1

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of L 90×90/10 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 5.4 kN·m

Shear/ 135.7 kN

Compression/ 39.2 kN

Steelγ_M0γ_M1L_crmmkClass3

Resistances and factors

M_c,y,Rd / M_c,z,RdW_el5.4 kN·m / 5.4 kN·m

V_c,z,Rd / V_c,y,RdA_v = 855 mm²135.7 kN / 135.7 kN

N_pl,Rd / N_b,Rd470.3 kN / 39.2 kN

N_cr,y / N_cr,v105.2 kN / 43.4 kN

f_yEN 10025-2275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve b · χ0.08

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.

For angles the bending values refer to the axes parallel to the legs, which are not principal axes. A moment about one of them also bends the section about the other, so bending has to be resolved into the principal axes u and v and checked biaxially. Buckling already uses the weaker principal axis v.