L · EN 10056-1

L 160×160/19

L 160×160/19 is an equal-leg steel angle per EN 10056-1: leg length 160 mm, thickness 19 mm, weight 45.1 kg/m, cross-section area 57.5 cm², moment of inertia Iy = 1347 cm⁴, elastic section modulus Wel,y = 118.7 cm³.

Cross section · mm

160Leg a · mm

19Thickness t · mm

57.50Area A · cm²

45.10Mass G · kg/m

Geometry

Leg length a160.00 mm

Thickness t19.00 mm

Cross-section area A57.500 cm²

Centroid C_x=C_y46.5 mm

Weight G
steel 7850 kg/m³45.10kg/m

Section properties

Moment of inertia I_y=I_z1 347.000 cm⁴

Section modulus W_el118.678 cm³

Plastic modulus W_pl215.640 cm³

Radius of gyration i_y48.40 mm

Principal axes u–v

I_u2 138.000 cm⁴

I_v556.500 cm⁴

Reference

Profile standardEN 10056-1

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of L 160×160/19 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 31.4 kN·m

Shear/ 439.9 kN

Compression/ 377.7 kN

Steelγ_M0γ_M1L_crmmkf_y265MPaClass3

Resistances and factors

M_c,y,Rd / M_c,z,RdW_el31.4 kN·m / 31.4 kN·m

V_c,z,Rd / V_c,y,RdA_v = 2875 mm²439.9 kN / 439.9 kN

N_pl,Rd / N_b,Rd1.52 MN / 377.7 kN

N_cr,y / N_cr,v1.12 MN / 461.4 kN

f_yt = 19.0 mm > 16 mm, EN 10025-2265 MPa

γ_M0 / γ_M11.00 / 1.00

Curve b · χ0.25

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.

For angles the bending values refer to the axes parallel to the legs, which are not principal axes. A moment about one of them also bends the section about the other, so bending has to be resolved into the principal axes u and v and checked biaxially. Buckling already uses the weaker principal axis v.