L · EN 10056-1

L 140×140/15

L 140×140/15 is an equal-leg steel angle per EN 10056-1: leg length 140 mm, thickness 15 mm, weight 31.4 kg/m, cross-section area 40 cm², moment of inertia Iy = 723.3 cm⁴, elastic section modulus Wel,y = 72.3 cm³.

Cross section · mm

140Leg a · mm

15Thickness t · mm

40.00Area A · cm²

31.40Mass G · kg/m

Geometry

Leg length a140.00 mm

Thickness t15.00 mm

Cross-section area A40.000 cm²

Centroid C_x=C_y40.0 mm

Weight G
steel 7850 kg/m³31.40kg/m

Section properties

Moment of inertia I_y=I_z723.300 cm⁴

Section modulus W_el72.330 cm³

Plastic modulus W_pl131.530 cm³

Radius of gyration i_y42.50 mm

Principal axes u–v

I_u1 149.000 cm⁴

I_v297.700 cm⁴

Reference

Profile standardEN 10056-1

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of L 140×140/15 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 19.9 kN·m

Shear/ 317.5 kN

Compression/ 209.2 kN

Steelγ_M0γ_M1L_crmmkClass3

Resistances and factors

M_c,y,Rd / M_c,z,RdW_el19.9 kN·m / 19.9 kN·m

V_c,z,Rd / V_c,y,RdA_v = 2000 mm²317.5 kN / 317.5 kN

N_pl,Rd / N_b,Rd1.10 MN / 209.2 kN

N_cr,y / N_cr,v599.6 kN / 246.8 kN

f_yEN 10025-2275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve b · χ0.19

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.

For angles the bending values refer to the axes parallel to the legs, which are not principal axes. A moment about one of them also bends the section about the other, so bending has to be resolved into the principal axes u and v and checked biaxially. Buckling already uses the weaker principal axis v.