FL · EN 10058

FL 30×12

FL 30×12 is a hot rolled steel flat bar per EN 10058: width 30 mm, thickness 12 mm, weight 2.8 kg/m, cross-section area 3.6 cm², moment of inertia Iy = 2.7 cm⁴, elastic section modulus Wel,y = 1.8 cm³.

Cross section · mm

30Width b · mm

12Thickness t · mm

3.60Area A · cm²

2.83Mass G · kg/m

Geometry

Width b30.00 mm

Thickness t12.00 mm

Cross-section area A3.600 cm²

Weight G
steel 7850 kg/m³2.83kg/m

Section properties

I2.700 cm⁴0.432 cm⁴

W_el1.800 cm³0.720 cm³

W_pl2.700 cm³1.080 cm³

i8.70 mm3.46 mm

Reference

Profile standardEN 10058

EurocodeEN 1993-1-1 (EC3)

Check to EN 1993-1-1

Work out the utilisation of FL 30×12 for your design forces

Find the lightest section Compare sections

Enter the design loads and the section is checked for bending, shear and compression with flexural buckling.

Bending/ 0.7 kN·m

Shear/ 57.2 kN

Compression/ 0.3 kN

Steelγ_M0γ_M1L_crmmkClass1

Resistances and factors

M_c,y,Rd / M_c,z,RdW_pl0.7 kN·m / 0.3 kN·m

V_c,z,Rd / V_c,y,RdA_v = 360 mm²57.2 kN / 57.2 kN

N_pl,Rd / N_b,Rd99.0 kN / 0.3 kN

N_cr,y / N_cr,z2.2 kN / 0.4 kN

f_yEN 10025-2275 MPa

γ_M0 / γ_M11.00 / 1.00

Curve c · χ0.00

Yield strength is taken from the product standard for the governing thickness, so above 16 mm it is lower than the nominal grade. Simplified checks per EN 1993-1-1, without M+N+V interaction, without lateral-torsional buckling and without web shear buckling. Verify with a full design.